DME64N, DME24N Digital Mixing Engine

DME64N DME24N
Internal processing 32bit 32bit
Sampling frequency rate Internal 44.1kHz, 48kHz, 88.2kHz, 96kHz 44.1kHz, 48kHz, 88.2kHz, 96kHz
External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%) 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay Less than 0.85 ms (MY8-AD96 to MY8-DA96) Less than 0.5 ms
Dynamic range DA: 106 dB DA: 106dB; AD+DA: 106dB
Crosstalk -80 dB -80 dB
Power requirements Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz Depend on area of purchase; AC100V, 120V or 220-240V; 50/60Hz
Power consumption 80W 75W
Dimensions W 480mm; 18-7/8in 480mm; 18-7/8in
H 145mm; 5-3/4in (3U) 101mm; 4in (2U)
D 411.5mm; 16-1/4in 411.5mm; 16-1/4in
Net weight 9.5kg; 20.9lbs 8kg; 17.6lbs
Accessories Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 2x 16-pin Euroblock plug, 4x 8-pin Euroblock plug Owner's manual, DME Designer Installation Guide, AC power cord, AC plug clamp, 16x 3-pin Euroblock plug
Total harmonic distortion - Less than 0.05% (20Hz-40kHz)
Frequency response - 0, +0.5, -1.5dB 20Hz-40kHz
Hum & noise level Equivalent input noise - -128dBu
Residual output noise - -82dBu
I/O Mic inputs - 8 (Remote HA)
Phantom power - +48V DC; ON/OFF: per channel
AD converter - 24-bit; 128-time over sampling
Line outputs - 8
DA converter - 24-bit; 128-time over sampling

Analog input characteristics (DME24N)

Input terminal Actual load impedance For use with nominal Input level Connector
GAIN Nominal Max. before clip
CH INPUT 1-8 -58dB
+10dB
3kohms 50-600ohm Mics & 600ohm Lines -58dBu -38dBu Euroblock
+10dBu +30dBu

Analog output characteristics (DME24N)

Output terminal Actual load impedance For use with nominal Output level Connector
Nominal Max. before clip
OUTPUT 1-8 75ohms 600ohm Lines +4dBu
-2dBu
+24dBu
+18dB
Euroblock
PHONES 15ohms 8ohms 75mW 150mW Stereo Phone
40ohms 65mW 150mW

Digital input and output characteristics (DME64N)

Terminal From Format Level IN/OUT Connector
CASCADE IN PM5D - RS422 32(IN) D-sub Half Pitch Connector 68Pin (female)
DME64N - RS422 32(IN/OUT)
CASCADE OUT PM5D - RS422 32(IN) D-sub Half Pitch Connector 68Pin (female)
DME64N - RS422 32(IN/OUT)

Control I/O characteristics

Terminal Format Level Connector
USB USB1.1 0V-3.3V B type USB Connector
MIDI IN MIDI - DIN-5pin
OUT MIDI - DIN-5pin
THRU MIDI - DIN-5pin
WORD CLOCK IN - TTL/75ohms(terminated) BNC
OUT - TTL/75ohms BNC
GPI IN - 0V-5V Euroblock
OUT - TTL Euroblock
+V - 5V Euroblock
REMOTE - RS232C D-sub 9pin(male)
- RS422
ETHERNET Ethernet - RJ45